As already mentioned we where not sure where to put the Tiny House when we started building it. We have made the construction so that we could lift it with a crane. As you might have noticed in previous pictures we have already moved the Tiny House once before, but not by crane. We used our Tractor with front end loader and our Telehandler to lift the Tiny House straight up and moved a trailer under neat it on which we sat it down gently. We moved it by trailer to a different spot where it was not in the way so much. After that we repeated the process with the Tractor and Telehandler and sat it down again. This method only allows the Tiny House to be lifted straight up and is not useful to put it on its foundation, so we used a 70 Ton crane this time.


On the final location we made a simple foundation for the Tiny House out of concrete and a stone slab. This foundation is more then enough since the Tiny House only needs a level service to sit on. The foundation is located on the old stable foundation which was leveled out with gravel.


In order to lift the Tiny House we put 2 Boat straps underneath the Tiny House. Those straps where then connected to lifting slings which where connected to chains. The chains where spread to minimize pressure on the Tiny House. We also put some temporary beams along the edge of the roof to help spread the pressure over the total roof construction.

Then we where ready to lift the Tiny House up. We did not lift the Tiny House very high and we moved it over very slowly. We let the pictures speak for themselves.







We positioned the Tiny House above the foundation and arranged some asphalt paper between the stone slap and the beams to prevent moisture coming up from the foundation. After that we gently sat the Tiny House down.

Mission accomplished, so we removed the straps and everything from the crane could be packed away again. The hole operation only took 1,5 Hours and went very well.



Fun fact the crane weighted the Tiny House at 7 Tons. We expected it to be around 3.5 Tons, so we where very surprised. You must know that we could only lift around 4 Tons in total with the Tractor and the Telehandler.

Next thing to do is to start working on the interior.